Cummins 5.9 24 Valve Ported & Polished Cylinder Head w/ Fire Ring Grooves

SKU: PDM-24VSTH
5.9 Cummins 24 Valve Performance Head - Industrial Injection
5.9 Cummins 24 Valve Performance Head - Industrial Injection

Cummins 5.9 24 Valve Ported & Polished Cylinder Head w/ Fire Ring Grooves

SKU: PDM-24VSTH
Regular price $4,069.45
/
  • Top-of-the-line Customer Service
  • Secure payments

Call To Order Only

☎️ 800-955-0476

Cummins 5.9 24 Valve Ported & Polished Cylinder Head w/ Fire Ring Grooves

Note: Fire Ring Head Gasket sold separately.

Core Charge $700.00 on top of listed price


The porting process preformed uses a new 5
Axis CNC Cylinder Head Porting Machine with CAD/CAM software specifically
designed for cylinder head porting. CNC porting brings unparalleled
accuracy to head porting with each port flowing the same. This helps balance
the power that each cylinder produces, making tuning easier.
After the CNC process we then hand blend each port to perfection.

 New Performance Stainless Steel Valves:

 We use the highest quality upgraded stainless steel valves with a
nitrate coating for ultimate durability to out-perform and outlast any
aftermarket or OE valves available.

 High Strength Alloy Valve Guides:

 New High Strength Alloy, Heat Treated iron
based valve guides are installed. These guides are heat treated to Rockwell 22 C Scale, which produces the ultimate in wear resistance. This is far superior
to original guide material, including Bronze. The guide incorporates a
spiral grove inside the guide to hold oil and aid the lubrication of the valve
during engine operation.

 High Temp Valve Seats:

Premium valve seat inserts made from a true
Nickel Based Non-Magnetic material that was developed for extreme operating
conditions. These performance valve seats immensely reduce the possibility or dropping a valve seat.

 Drilled & Tapped Coolant Freeze Plugs In Head:

 The factory head has press in freeze plugs that are prone to
leaking and blowing out under the valve cover. This process eliminates the
failure from ever happening to you with our cylinder heads. We use high quality
steel plugs where others use aluminum that are prone to leak.

 Fire Ringed Head:

 The fire ringed head procedure was designed to use with our custom
fire ring head gasket which utilizes a radius cut steel fire ring to virtually
eliminate head gasket failures while still allowing you to daily drive your
vehicle with confidence in its longevity capabilities.

Valve Springs:

We use the highest quality brand new 95lb valves
springs custom made right here in the USA. We designed these springs to offer
more lift than the competition. Each valve spring is tested multiple times in
house before assembly to ensure it maintains it proper spring rate.

 The Build Process:

Heads are first jet washed in a high pressure spray cabinet to
remove oil and dirt, then glass beaded to remove carbon. Next they are checked
by magnafluxing, (cast iron only) or pressure testing. They are visually
inspected for defects that would make them unusable. Valve guides and seats are
removed as needed for porting.

Port development is accomplished using a SuperFlow 600 flow bench with a
computer recording all flow measurements.
Many things are considered when designing a cylinder head Port; air flow is
only one of the things to think about. Another major concern is port wall
thickness.

Anyone can get a head to produce high flow numbers, but if doing so leaves the
port wall to thin the casting will crack. High performance Diesel heads are
more prone to crack because of the thermal shock experienced by excessive
intermittent or long term exhaust temperatures.

The porting is then preformed using a new 5 Axis CNC Cylinder Head Porting
Machine with CAD/CAM software specifically designed for cylinder head
porting. CNC porting brings unparalleled accuracy to head porting with
each port flowing the same. This helps balance the power that each cylinder
produces, making tuning easier.

 New High Strength Alloy, Heat Treated iron based valve guides are installed.
These guides are heat treated to Rockwell 22 “C” Scale, which produces the
ultimate in wear resistance. This is far superior to original guide material,
including Bronze. The guide incorporates a spiral grove inside the guide
to hold oil and aid the lubrication of the valve during engine operation.

Guides are then honed (not reamed) to exact size using a diamond honing
mandrel. Diamond abrasives allow for consistency of size, surface finish, and
bore geometry with no variation from guide to guide. The guide size is then
verified using a valve guide bore gauge.

As needed the head receives new Premium valve seat inserts made from a true
Nickel Based Non-Magnetic material that was developed for extreme operating
conditions.

Next the head is treated to a multi angle valve job to help maximize the flow
of air in and out of the head. This is accomplished using a Serdi 100 guide and
seat machine. Serdi uses a solid carbide straight shank pilot. When inserted
into the valve guide, it simulates the real valve stem during the centering
process. This guarantees the valve seat is finished for a perfect valve to seat
match.

Using CBN or Diamond tooling the head is given a new surface. With our Berco
milling machine we can control the surface finish to accommodate different head
gasket types. For example MLS head gaskets require a very smooth surface
finish.

Finally the head is jet washed dried and assembled with new valve seals and new
 valve springs.

 

 

Free economy ground shipping on most orders over $200. This includes lower 48 United States only. Excludes products that must ship freight.

More from Head Components
Delivery Valves Set .191 - Industrial Injection
Delivery Valves Set .191 - Industrial Injection
Delivery Valves Set .191
$369.86
24F603_003.jpg
24F603_002.jpg
Cummins 24v Billet Rocker Arm Valve Bridge
$38.00
IISC15CYLHD II New 3406E/C15/ACERT Upgrade Universal Cylinder Head w/Inconel Valves - Industrial Injection
IISC15CYLHD II New 3406E/C15/ACERT Upgrade Universal Cylinder Head w/Inconel Valves
$4,300.00
Industrial Injection LB7 Duramax 6.6 Race Heads (2001-2004) - Industrial Injection
Industrial Injection LB7 Duramax 6.6 Race Heads (2001-2004) - Industrial Injection
LB7 Duramax Ported & Polished Cylinder Heads
$4,473.88
Industrial Injection 5.9 Cummins 12 Valve Performance Head 1989-1998 - Industrial Injection
Industrial Injection 5.9 Cummins 12 Valve Performance Head 1989-1998 - Industrial Injection
Cummins 5.9 12 Valve Ported & Polished Cylinder Head w/ Fire Ring Grooves
$3,145.96
Industrial Injection LML Duramax Race Heads (2011-2016) - Industrial Injection
Industrial Injection LML Duramax Race Heads (2011-2016) - Industrial Injection
Industrial Injection LML Duramax Ported & Polished Cylinder Heads
$3,468.12
Recently viewed