2007.5+ Cummins 6.7L Performance Head

SKU: PDM-67STH
2007.5+ Cummins 6.7L Performance Head

2007.5+ Cummins 6.7L Performance Head

SKU: PDM-67STH
Regular price $4,069.45
/
  • Free Ground shipping (Over $200*)
  • Top-of-the-line Customer Service
  • Secure payments
Shipping calculated at checkout.

Product Description:

The Industrial Injection 6.7L Cummins Performance Heads are designed for the daily driver / weekend warrior in mind. Fully CNC ported heads complete and ready to bolt on.

 

 

 

 

 

Note: Fire Ring Head Gasket sold separately.

Features:

 

 

 

CNC Ported Cylinder Head:

 

 

The porting process preformed uses a new 5 Axis CNC Cylinder Head Porting Machine with CAD/CAM software specifically designed for cylinder head porting. CNC porting brings unparalleled accuracy to head porting with each port flowing the same. This helps balance the power that each cylinder produces, making tuning easier. After the CNC process we then hand blend each port to perfection.

 

New Performance 36mm Oversized Stainless Steel Valves:

 

 

We use the highest quality upgraded stainless steel valves with a nitrate coating for ultimate durability to out-perform and outlast any aftermarket or OE valves available.

 

 

 

High Strength Alloy Valve Guides:

 

 

New High Strength Alloy, Heat Treated iron based valve guides are installed. These guides are heat treated to Rockwell 22 C Scale, which produces the ultimate in wear resistance. This is far superior to original guide material, including Bronze. The guide incorporates a spiral grove inside the guide to hold oil and aid the lubrication of the valve during engine operation.

 

 

 

Performance High Temp Valve Seats:

 

 

Premium valve seat inserts made from a true Nickel Based Non-Magnetic material that was developed for extreme operating conditions. These performance valve seats immensely reduce the possibility of dropping a valve seat.

 

 

 

Drilled & Tapped Coolant Freeze Plugs In Head:

 

 

The factory head has press in freeze plugs that are prone to leaking and blowing out under the valve cover. This process eliminates the failure from ever happening to you with our cylinder heads. We use high quality steel plugs where others use aluminum that are prone to leak.

 

 

 

Fire Ringed Head:

 

 

The fire ringed head procedure was designed to use with our custom fire ring head gasket which utilizes a radius cut steel fire ring to virtually eliminate head gasket failures while still allowing you to daily drive your vehicle with confidence in its longevity capabilities.

 

 

Valve Springs:

 

 

We use the highest quality brand new performance 95lb valves springs custom made right here in the USA. We designed these springs to offer more lift than the competition. Each valve spring is tested multiple times in house before assembly to ensure it maintains its proper spring rate.

 

 

 

 

 

The Build Process:

 

 

Heads are first jet washed in a high pressure spray cabinet to remove oil and dirt, then glass beaded to remove carbon. Next they are checked by magnafluxing, (cast iron only) or pressure testing. They are visually inspected for defects that would make them unusable. Valve guides and seats are removed as needed for porting.

 

 


Port development is accomplished using a superflow 600 flow bench with a computer recording all flow measurements.
Many things are considered when designing a cylinder head Port; air flow is only one of the things to think about. Another major concern is port wall thickness.

 

 


Anyone can get a head to produce high flow numbers, but if doing so leaves the port wall to thin the casting will crack. High performance Diesel heads are more prone to crack because of the thermal shock experienced by excessive intermittent or long term exhaust temperatures.

 

 


The porting is then preformed using a new 5 Axis CNC Cylinder Head Porting Machine with CAD/CAM software specifically designed for cylinder head porting. CNC porting brings unparalleled accuracy to head porting with each port flowing the same. This helps balance the power that each cylinder produces, making tuning easier.

 

 


New High Strength Alloy, Heat Treated iron based valve guides are installed. These guides are heat treated to Rockwell 22 “C” Scale, which produces the ultimate in wear resistance. This is far superior to original guide material, including Bronze. The guide incorporates a spiral grove inside the guide to hold oil and aid the lubrication of the valve during engine operation.

 

 


Guides are then honed (not reamed) to exact size using a diamond honing mandrel. Diamond abrasives allow for consistency of size, surface finish, and bore geometry with no variation from guide to guide. The guide size is then verified using a valve guide bore gauge.

 

 


As needed the head receives new Premium valve seat inserts made from a true Nickel Based Non-Magnetic material that was developed for extreme operating conditions.

 

 


Next the head is treated to a multi angle valve job to help maximize the flow of air in and out of the head. This is accomplished using a Serdi 100 guide and seat machine. Serdi uses a solid carbide straight shank pilot. When inserted into the valve guide, it simulates the real valve stem during the centering process. This guarantees the valve seat is finished for a perfect valve to seat match.

 

 


Using CBN or Diamond tooling the head is given a new surface. With our berco milling machine we can control the surface finish to accommodate different head gasket types. For example MLS head gaskets require a very smooth surface finish.

 

 

 


Finally the head is jet washed dried and assembled with new valve seals and new performance valve springs.

    Free economy ground shipping on most orders over $200. This includes lower 48 United States only. Excludes products that must ship freight.

    Please return all cores to:

    INJECTORS AND FUEL PUMPS

    Industrial Injection Service Core Returns
    1201 South 700 West
    Salt Lake City, Utah 84104

    TURBOS, ENGINE PARTS, & RETURNS

    Industrial Injection Diesel Core Returns
    2858 South 300 West
    Salt Lake City, Utah 84115

    INCLUDE RGA# THAT WAS ISSUED AT TIME OF PURCHASE! If RGA # is lost, please call Customer Service at (800) 955-0476. Have your original invoice at time of phone call to give all appropriate information for return.

    Core return freight is the responsibility of the customer

    FULL CREDIT WILL BE GIVEN WHEN: 

    In order to receive full core credit, your core(s) must be returned within 60 days from receipt of order. It must be as is “off the engine.” Full core credit will be given if core meets acceptance criteria. Cores that are damaged during shipment to Industrial Injection Service are the responsibility of the customer and their shipping company.

    ½ CORE CHARGE CREDIT WILL BE GIVEN WHEN:

    •  Core is acceptable but has been returned after 60 days of invoice and before 90 days
    • Slightly damaged housing or camshaft

    No Core Credit issued when:

    • Cores is seized or hydraulic head is cracked
    • Excessive damage ( Heavy use of Bio-diesel and rust are common causes for unacceptable core)
    • Core is fire damaged
    • Core is returned after 90 days/3months

    Please do the following when returning a core:

    • Make sure you have removed all fittings from your old unit
    • Drain all fuel and oil from unit
    • Package cores so that fuel and oil does not escape from the package

    NOTE: packages that have fuel or oil residue on the outside of the box during shipping will not be delivered by UPS or the postal service which will cause delays.

    • Please re-use boxes and bags that parts were shipped in originally. These boxes are UPS approved to reduce damage while being handled in freight.
    • All shipping charges are the responsibility of the customer
    • Please write on the box “Core Return” and have RGA # clearly written on the outside of box
    • Include copy of original invoice and RGA inside box

    PLEASE RETAIN RGA#, INVOICE # AND TRACKING NUMBER UNTIL CREDIT IS RECEIVED BY YOU. We do not research by customer name, only invoice # or RGA #.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    More from Cummins
    Cummins 5.9L Super PhatShaft Turbo (1994-2002)
    from $2,416.90
    5.9 Cummins P7100 Dragon Fly 12MM Pump (500-800Hp)*
    $2,341.83
    OE Bosch Re-manufactured 2010-2012 Cummins 6.7L Cab & Chassis Injector
    $307.81
    OE Bosch Re-manufactured Cab and Chassis 6.7L CR Stock Injector 2011-2012
    $455.79
    NEW Factory OEM 5.9L 2003-2004 Cummins Fuel Injector
    $399.00
    2000-2001 5.9 Cummins Injector | Bosch 245HP HO 6 Speed Manual Trans
    $100.99
    Recently viewed