Industrial Injection Heavy Duty Charge Air Cooler Boot Kit • Part # C27601
SKU: C27601
Product Description:
Industrial Injection Heavy Duty Charge Air Cooler Boot Kit • Part # C27601
Upgrade the reliability of your charge-air system with the Industrial Injection Heavy Duty Charge Air Cooler Boot Kit. Built for hard-working heavy-duty trucks, this kit delivers stronger, longer-lasting boost connections you can depend on. Each boot is made from durable 4-ply reinforced silicone for added strength and heat resistance, giving you a noticeable improvement over worn factory boots. The included spring-loaded T-bolt clamps apply even and consistent pressure to help prevent blowouts and boost leaks under load.
This kit fits most Heavy Duty applications such as Peterbilt, Kenworth, Freightliner, and other common Class-8 platforms that use standard CAC boot and clamp sizes. It’s an ideal replacement option for stock boots or a reliable upgrade for trucks seeing higher boost or demanding duty cycles.
Key Features
- 4-ply reinforced construction CAC boots for improved strength and heat resistance
- Heavy Duty spring-loaded T-bolt clamps for even and secure clamping pressure
- Designed to reduce boost leaks and increase long-term reliability
- Direct-fit upgrade for most Peterbilt, Kenworth, Freightliner, and other HD truck applications
- Suitable for stock or performance-modified applications
Fitment
This Heavy Duty Charge Air Cooler Boot Kit is built for applications that use 4-inch diameter, 6-inch length CAC boots. This size is commonly found on many Class-8 heavy-duty truck platforms, including:
- Peterbilt models using 4" CAC connections
- Kenworth models using 4" CAC connections
- Freightliner models using 4" CAC connections
- Additional heavy-duty trucks and vocational chassis equipped with 4" charge-air piping
- If your truck does not use a 4-inch CAC boot, this kit will not fit. Always measure the outside diameter of your charge-air piping before ordering.
FAQ
What size are these boots?
Each boot is 4 inches in diameter and 6 inches in length, designed for heavy-duty applications with 4" charge-air piping.
Will this kit fit my truck?
It fits any heavy-duty truck using 4" CAC connections. This includes many Peterbilt, Kenworth, and Freightliner configurations.
Are these boots stronger than OEM?
Yes. These 4-ply reinforced silicone boots offer significantly improved strength, heat resistance, and durability compared to many OEM rubber boots, especially on high-mileage or high-heat vehicles.
Do the clamps help prevent boost leaks?
Yes. The spring-loaded T-bolt clamps apply consistent tension and help maintain a secure seal under boost pressure, vibration, and temperature changes.
Do I need special tools to install the kit?
Only basic hand tools are required. Ensure your CAC pipes are clean and properly aligned before tightening the clamps.
Is this a direct replacement for my existing CAC boots?
Yes, as long as your system uses 4-inch diameter boots. This kit replaces most standard 4" charge-air boots used in Class-8 truck platforms.
Read Carefully!
When you purchase a product from our website that has a core requirement, you have two options:
1. You choose to pay the core charge and we will ship the product right away, then once we receive the cores you will be refunded the core charge if your cores pass our inspection qualifications. This is the preferred choice and has the least delays.
2. You choose to send in your cores before we ship the product that was purchased. This choice has the risk of delayed shipment of your purchased product and our inventory is not guaranteed by the time we receive your cores. You will need to follow all of the instructions below as quickly as possible so that you can get your purchased product and we can receive the cores. When you choose this option you acknowledge that by the time we receive your cores, our inventory could have change and there could be a delay in your shipment.
Please return all cores to:
Industrial Injection Core Returns
2858 South 300 West
Salt Lake City, Utah 84115
INCLUDE RA# THAT WAS ISSUED AT TIME OF PURCHASE! If RA # is lost, please call Customer Service at (800) 955-0476. Have your original invoice at time of phone call to give all appropriate information for return.
Core return freight is the responsibility of the customer
FULL CREDIT WILL BE GIVEN WHEN:
In order to receive full core credit, your core(s) must be returned within 90 days from receipt of order. It must be as is “off the engine.” Full core credit will be given if core meets acceptance criteria. Cores that are damaged during shipment to Industrial Injection are the responsibility of the customer and their shipping company.
½ CORE CHARGE CREDIT WILL BE GIVEN WHEN:
- Slightly damaged housing or camshaft
- Missing parts such as FCA
No Core Credit issued when:
- Core is seized or hydraulic head is cracked
- Excessive damage ( Heavy use of Bio-diesel and rust are common causes for unacceptable core)
- Core is fire damaged
- Core is returned after 90 days/3months
Please do the following when returning a core:
- Make sure you have removed all fittings from your old unit
- Drain all fuel and oil from unit
- Package cores so that fuel and oil does not escape from the package
NOTE: packages that have fuel or oil residue on the outside of the box during shipping will not be delivered by UPS or the postal service which will cause delays.
- Please re-use boxes and bags that parts were shipped in originally. These boxes are UPS approved to reduce damage while being handled in freight.
- All shipping charges are the responsibility of the customer
- Please write on the box “Core Return” and have RA # clearly written on the outside of box
- Include copy of original invoice and RGA inside box
PLEASE RETAIN RA#, INVOICE # AND TRACKING NUMBER UNTIL CREDIT IS RECEIVED BY YOU. We do not research by customer name, only invoice # or RA #.
Questions About This Product?
You may also like
More from All Products
Recently viewed